Quartz Analogue Nurse Watch Instruction Manual

HOW TO USE THE WATCH
If there’s a small piece of plastic inserted at crown position, a battery stopper, please remove it before setting the time.
TIME SETTING FOR WATCHES WITHOUT CALENDAR
1. Pull out the crown all the way.
* If your watch has three hands, pull out the crown when the second hand is pointing to 12 o’clock.
2. Adjust the time by turning the crown in the desired direction.
3. Push the crown back in to the normal position.
* If your watch has three hands, push the crown back in to the normal position in accordance with a
time signal for “00” seconds.

Note: When setting the minute hand of a quartz watch, advance it to a few minutes ahead
of the time and then turn it back to the exact time.

CHANGING BATTERY IN ANALOGU QUARTZ WATCH
Because the battery is inserted at the factory to check the function and performance of the watch, its actual service life once in your possession may be less than the specified period.
When the battery expires, make sure to replace it as soon as possible to prevent any malfunction.

For battery replacement , we recommend that you go to the watch repair shop with professional tools.

1.       Open the back case with a sharp and thin instrument

2.       Remove the white plastic cover and the battery

3.       Insert the new battery complying with the correct polarity.

4.        Replace the white plastic cover and close the back case

when the battery is low, throw it into the waste collection container; please refer to the procedure for the collection of batteries

Battery: Cell button battery , 1.5V , Model: SR626SW / 377A/LR44 etc